Oil Pump Installation - Sym EuroMX 125 Service Manual

3. Lubrication System
Install driving gear and clamp.
Caution
Install the oil pump cover and fixing pin
properly.

Oil Pump Installation

Install the oil pump (3 screws).
Caution
The elliptical hole on the driving gear is not
match with the screw hole. Thus, the elliptical
hole has to align with the screw hoe before
tightening it.
Install oil pump outer cover (2 bolts).
Install the starting gear and the alternator.
(Refer to chapter 10)
3-6
This chapter Contents
2 screws
3 screws