Reel Clutch Cable Replacement - Toro Greensmaster eFlex 1800 Service Manual

Reel Clutch Cable Replacement

Note orientation
of spring hook
3
5
10
9
RIGHT
FRONT
1. Brake cable
2. Brake lever
3. Lever assembly
4. Shift mount
Removal
1. Park machine on level surface. Turn key switch to the
OFF position and remove key from the switch. Discon-
nect the battery pack (see Battery Pack Connection in
the General Information section).
2. Remove reel clutch cable from transmission (Fig. 8):
A. Loosen front cable jam nut and lift cable free from
casting slot of transmission.
B. Remove retaining ring that secures cable eyelet
to reel clutch lever and slide cable eyelet from lever.
C. Remove cable tie that secures reel drive cable to
transmission bracket.
Chassis and Controls
11
4
5. Reel clutch cable
6. Console cover
7. Washer head screw (4 used)
8. Lower handle
8
6
Figure 7
3. Remove console cover from handle assembly to al-
low access to upper end of reel clutch cable.
4. Remove reel clutch cable from traction lever as-
sembly (Fig. 9):
A. Loosen lower cable jam nut that secures reel
clutch cable to shift mount bracket on handle. Slide
cable from bracket.
B. Remove cable spring from spring anchor on lever
assembly. Note orientation of cable spring hook on
lever assembly for assembly purposes.
5. Remove reel clutch cable from machine.
Page 5 - - 8
2
1
7
9. Traction switch
10. Reel engage switch
11. Shifter bracket
Greensmaster eFlex1800/2100