Setting The Reel Speed - Toro Reelmaster 5010-H Operator's Manual

Setting the Reel Speed

To achieve a consistent, high quality-of-cut and a uniform after cut appearance, it is important that you set the
reel speed to the proper setting. Adjust the reel speed as follows:
1. In the InfoCenter, under the settings menu, enter the blade count, mow speed, and HOC to calculate
the proper reel speed.
2. If further adjustments are required, in the settings menu, scroll down to the F Reel RPM, R Reel RPM, or
both.
3. Press the right button to change the reel speed value. As the speed setting is changed, the display
continues to show the calculated reel speed based on blade count, mow speed, and HOC, but the new
value is also displayed.
Note:
The reel speed may need to be increased or decreased to compensate for varying turf conditions.
Figure 54
5 inch (127 mm) Reel Speed Chart
Figure 55
7 inch (178 mm) Reel Speed Chart
36
g031995
g031996