Table of Contents
Advertisement
Figure 54
1. Switch
4.
Adjust the lift-arm switch as follows:
Setting the Reel Speed
To achieve a consistent, high quality of cut and a uniform after cut appearance, it is important that you set the
reel speed to the proper setting. Adjust the reel speed as follows:
1.
In the InfoCenter, under the settings menu, enter the blade count, mow speed and HOC to calculate
the proper reel speed.
2.
If further adjustments are required, in the settings menu, scroll down to the F Reel RPM, R Reel RPM, or
both.
3.
Press the right button to change the reel speed value. As the speed setting is changed, the display will
continue to show the calculated reel speed based on blade count, mow speed and HOC, but the new
value will also be displayed.
Note:
The reel speed may need to be increased or decreased to compensate for varying turf conditions.
g375696
2. Lift-arm sensing device
5 inch (127 mm) Reel Speed Chart
•
To increase the lift-arm turnaround height,
move the switch down.
•
To decrease the lift-arm turnaround height,
move the switch up.
5.
Tighten the jam nut.
Figure 55
34
g031995
Advertisement
Table of Contents
