Battery Pack Connection; Safety And Instruction Decals - Toro Greensmaster eFlex 1800 Service Manual

Battery Pack Connection

CAUTION
Before servicing the machine, disconnect the
the machine from the battery pack. This will pre-
vent unexpected machine operation.
To prevent unexpected machine operation during ser-
vice, disconnect the machine from the battery pack as
the first step in any repair (Fig. 1). Once the battery pack
has been disconnected, the electrical system on the ma-
chine can be safely worked on. Take care during repairs,
however, to not allow tools or vehicle components to
complete the battery circuit that was opened with the
cable removal.
Connect the machine wire harness to the battery pack
as the last step in any repair.
WARNING
The eFlex battery pack contains high voltage
which could burn or electrocute you.

Never attempt to open the battery pack.

Do not place anything in the connector on
the battery pack other than the wire
harness connector that came with the
product.
 Use extreme care when handling a battery
pack with a cracked case.

Only use the charger designed for the
battery pack.

Safety and Instruction Decals

Safety decals and instructions are easily visible to the
operator and are located near any area of potential dan-
ger. Replace any decal that is damaged or lost. Decal
part numbers are listed in your Parts Catalog. Order re-
placement decals from your Authorized TORO Distribu-
tor.
Safety
3
1. Battery pack
2. Battery connector
Page 1 - - 4
2
Figure 1
3. Machine connector
Greensmaster eFlex 1800/2100
1