Setup; Connecting The Battery Cable; Charging The Batteries; Installing The Grass Deflector - Toro eS3000SD 72V Operator's Manual

Setup

1
Connecting the Battery
Cable
No Parts Required
Procedure
1. Tilt the seat forward.
2. Remove the rear cover to access the batteries;
refer to Accessing the Batteries (page
3. Connect the 2 cables.
4. Ensure that all wiring is secure.
5. Install the top cover and secure it with the 4
screws.
6. Lower the seat.
23).
Figure 5
2

Charging the Batteries

No Parts Required
Procedure
Refer to Charging the Batteries (page
3
Installing the Grass
Deflector
No Parts Required
Procedure
Refer to Converting the Mower to Side-Discharging or
Mulching (page
g343324
13
26).
17).