Toro Greensmaster eFlex 1800 Service Manual page 120

4. Connect spring (item 11 in Figure 11) between trac-
tion lever assembly and operator presence control.
5. Connect wire harness connectors to traction and reel
engage switches (Fig. 11).
6. Connect reel clutch cable to lever assembly (see
Reel Clutch Cable Replacement in this section). Check
cable operation and adjust as necessary.
7. Check adjustment of traction and reel engage
switches (see Traction Switch and Reel Engage Switch
in the Adjustments section of Chapter 5 -- Electrical Sys-
tem). Adjust switches if necessary.
8. Install console cover to handle.
9. Connect the battery pack (see Battery Pack Connec-
tion in this section).
Chassis and Controls
2
5
1. Transport lever
2. Reel shaft lever
3. Clearance location
Page 5 - - 12
3
1
4
Figure 13
4. Shifter bracket
5. Screw and nut
Greensmaster eFlex1800/2100
5