Idle Air Control Solenoid Valve - Subaru 2003 LEGACY Service Manual

Hide thumbs Also See for 2003 LEGACY:
Table of Contents

Advertisement

FUEL INJECTION (FUEL SYSTEMS)
11.Idle Air Control Solenoid
Valve
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Disconnect the connector from the idle air con-
trol solenoid valve.
3) Remove the idle air control solenoid valve from
the throttle body.

IDLE AIR CONTROL SOLENOID VALVE

FU-00009
FU-00298
FU-00299
FU(H4SO)-34
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Always use new gasket.
Tightening torque:
1.6 N·m (0.16 kgf-m, 1.2 ft-lb)
FU-00299

Advertisement

Table of Contents
loading

Table of Contents