1.2 System Administration
System Programming with Proprietary Telephone
Description
The system can be programmed using a display proprietary telephone (PT).
The available extensions to perform System Programming are:
a)
An extension that is connected to jack 01.
b)
An extension that is assigned as a manager. <[006] Operator / Manager Extension
Assignment>
For more information and programming instructions, refer to the Programming Guide.
Conditions
• During System Programming the system operates normally.
• During System Programming the programming extension is considered to be busy.
• The display on the PT permits interactive programming.
• Access to System Programming is allowed only one at a time.
• To access system administration, a valid password must be entered. The password is
factory-programmed and can be changed. <[107] System Password>
• Programmes [0XX] (Manager Programming) can be changed by any user (User
Programming).
Programming Guide References
• [006] Operator / Manager Extension Assignment
• [107] System Password
Features Guide References
• System Programming and Diagnosis with Personal Computer
User Manual References
None
16
Features Guide