Yamaha XT1200Z 2010 Service Manual page 473

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
2. Check the entire signaling system
wiring.
Refer to "CIRCUIT DIAGRAM" on
page 8-21.
OK ↓
Replace the horn.
The tail/brake light fails to come on.
1. Check the front brake light switch.
Refer to "CHECKING THE
SWITCHES" on page 8-137.
OK ↓
2. Check the rear brake light switch.
Refer to "CHECKING THE
SWITCHES" on page 8-137.
OK ↓
3. Check the entire signaling system
wiring.
Refer to "CIRCUIT DIAGRAM" on
page 8-21.
OK ↓
Replace the tail/brake light.
The turn signal light, turn signal indicator light or both fail to blink.
1. Check the turn signal light bulbs
and sockets.
Refer to "CHECKING THE BULBS
AND BULB SOCKETS" on page
8-140.
OK ↓
2. Check the turn signal switch.
Refer to "CHECKING THE
SWITCHES" on page 8-137.
OK ↓
3. Check the hazard switch.
Refer to "CHECKING THE
SWITCHES" on page 8-137.
OK ↓
4. Check the turn signal/hazard relay.
Refer to "CHECKING THE RE-
LAYS" on page 8-145.
OK ↓
email: info@motomatrix.co.uk
SIGNALING SYSTEM
NG →
Properly connect or repair the signaling
system wiring.
NG →
Replace the front brake light switch.
NG →
Replace the brake light switch.
NG →
Properly connect or repair the signaling
system wiring.
NG →
Replace the turn signal light bulb, socket or
both.
NG →
The turn signal switch is faulty. Replace
the left handlebar switch.
NG →
The hazard switch is faulty. Replace the
left handlebar switch.
NG →
Replace the turn signal/hazard relay.
8-24