Bearings And Oil Seals; Circlips - Yamaha XT1200Z 2010 Service Manual

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
EAS20231

BEARINGS AND OIL SEALS

Install bearings "1" and oil seals "2" so that the
manufacturer marks or numbers are visible.
When installing oil seals, lubricate the oil seal
lips with a light coat of lithium-soap-based
grease. Oil bearings liberally when installing, if
appropriate.
ECA13300
NOTICE
Do not spin the bearing with compressed air
because this will damage the bearing surfac-
es.
EAS20240

CIRCLIPS

Before reassembly, check all circlips carefully
and replace damaged or distorted circlips. Al-
ways replace piston pin clips after one use.
When installing a circlip "1", make sure the
sharp-edged corner "2" is positioned opposite
the thrust "3" that the circlip receives.
email: info@motomatrix.co.uk
IMPORTANT INFORMATION
1-38