Removing The Clutch - Yamaha XT1200Z 2010 Service Manual

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
EAS25070

REMOVING THE CLUTCH

1. Remove:
• Clutch cover "1"
TIP
Loosen each bolt 1/4 of a turn at a time, in stag-
es and in a crisscross pattern. After all of the
bolts are fully loosened, remove them.
2. Remove:
• Clutch spring plate retainer "1"
• Clutch spring plate "2"
TIP
Loosen the clutch spring plate retainer bolts in
stages and in a crisscross pattern.
2
1
3. Remove:
• Friction plates
• Clutch plates
TIP
Before removing friction plate 1, put an identifi-
cation mark "a" on the plate.
email: info@motomatrix.co.uk
4. Remove:
• Long clutch push rod "1"
TIP
Push the long clutch push rod into the clutch re-
lease cylinder side of the engine, and remove it
from the clutch side of the engine.
1
5. Straighten the clutch boss nut rib "a".
6. Loosen:
• Clutch boss nut "1"
TIP
While holding the clutch boss "2" with the univer-
sal clutch holder "3", loosen the clutch boss nut.
a
7. Remove:
• Clutch boss nut "1"
• Conical spring washer "2"
• Clutch boss assembly "3"
5-60
a
Universal clutch holder
90890-04086
YM-91042
3
CLUTCH
1
2
1