Handset Configuration; Configure A Handset With A Template; Create A Template; Ascom D81 Dect Handset Td 92674En - ASCOM d81 Configuration Manual

Configuration Manual
Ascom d81 DECT Handset
5.

Handset Configuration

Note: This chapter describes settings in parameter definition files (.def). These files are
regularly updated and settings may change slightly. For example "On" to "Enable" or a
parameter can be moved to another directory.
5.1

Configure a Handset with a Template

A template contains one or more parameter settings. By using a template, the same
configuration can easily be applied to many handsets simultaneously. Templates are also an
efficient way to give good control over which changes that are applied to each handset.
Templates enables configuration of all aspects of a handset from sound volume to keypad
short cuts.
Your supplier can provide example templates for different PBX:s. The handset has full
functionality to the PBX even without such a template. By using such a template, though,
the handset is customized for that PBX with menu options for PBX specific functions such as
Callback.
A template can be created (see
Installation and Operation Manual for PDM/Device Manager.
5.1.1

Create a Template

1 Open the PDM or the Device Manager.
2 In the Templates tab, select Template > New. The Create Template window is opened.
3 Select the device and parameter version that matches the software version installed
on the handset. Give the template a descriptive name.
The parameters that are not part of the template is left unchanged on the handset.
The parameter version of an installed handset is visible under the Numbers tab or the
Devices tab.
4 Select the checkbox of each parameter that you want to be part of this template and
enter the proper value.
5 Click "OK" to save your template.
5.1.2

Apply a Template

1 Open the PDM or the Device Manager.
2 In the Numbers tab, right-click the handsets you want to apply the template to.
3 Select "Run template...".
Only templates with a parameters version matching the selected handsets are
shown. Select the template you want to apply and click "OK".
The template is applied. The number of parameters in the template affects the time it
takes to apply the template to the selected handsets.
When looking at a handset under the Numbers tab, the column Last run template
shows the name of the most recently applied template.
Tip: A template can be applied to several handsets of the same d81 device type
simultaneously using the Baseline function in the Device Manager. See Installation and
Operation Manual for the Unite module.
29 April 2015 / Ver. I
5. Handset Configuration
5.1.1 Create a Template) and/or imported (see the
TD 92674EN
18