Allow Or Disallow Advanced Call Functions; Allow Or Disallow Incoming Messages; Actions When Handset Placed In Charger; Action When Not In Call - ASCOM d81 Configuration Manual

Configuration Manual
Ascom d81 DECT Handset

5.14.5 Allow or Disallow Advanced Call Functions

The handset is enabled, by default, to let the user access the functions described in
Call Menu on page 23 during a call. The user can be prevented from accessing these
functions by not displaying the "More" softkey during the call. To access and configure the
parameter associated with the display of the call functions, perform the following steps:
1 Select Customization > Phone Restrictions
2 Select the Allow advanced call functionality parameter.
3 From the drop-down menu associated with the parameter, select one of the
following:
• Yes - Retain the default and allow the user to access call functions
• No - Prevent the user from accessing call functions.

5.14.6 Allow or Disallow Incoming Messages

The handset is enabled, by default, to receive text messages unless explicitly configured not
to do so. Whether or not incoming text message are allowed is determined by the value of
the Allow incoming messages parameter, which is set in the following way:
1 Select Customization > Phone Restrictions
2 Select the Allow incoming messages parameter.
3 From the drop-down menu associated with the parameter, select one of the
following:
• Yes - Retain the default and allow incoming text messages to be received
• No - Disallow incoming text messages from being received.
•

5.15 Actions when Handset Placed in Charger

5.15.1

Action when not in Call

The handset can be configured to perform an action when it is placed in a charger. The
selected action is only performed when no call is established. When the handset is removed
from the charger, it returns to previous settings.
NOTE: If the Logout action is enabled, the handset needs to be logged in manually when it is
removed from the charger.
1 Select Connections > In Charger
2 In the In charger action drop-down list, select one of the following:
• No action - no action is performed when handset is placed in charger
• Switch off - the handset is switched off when placed in charger
• Redirect - the handset redirects all calls and messages when placed in charger. 
NOTE: The destination number must be programmed in the PBX to be able to
29 April 2015 / Ver. I
5. Handset Configuration
TD 92674EN
5.9 In
29