View Handset License; Upgrade Handset By License - ASCOM d81 Configuration Manual

Configuration Manual
Ascom d81 DECT Handset
TIP: Several handsets of the same device type (d81) can be upgraded simultaneously using
the Baseline function in the Unite module. See the Installation and Operation Manual for the
Unite module.
4.3

View Handset License

The license(s) of a handset can be viewed as follows;
• In idle mode, press *#34# and select "License", or
• View the license(s) via the Admin menu in the handset, see
page 62, or
• In the PDM, select the "Licenses" tab and select handset in the list. In the bottom of the
work area, the license options of the device are listed, and whether the options are
enabled or not.
4.4

Upgrade Handset by License

Tip: It is recommended to read the Function Description, Product Licensing Overview, TD
92677GB before reading this section. The document describes how to view current
license(s), purchase license(s) and the technical solution of the upgrading alternatives
described below.
A handset can be upgraded to Protector and new functionality by adding a license key for
the new functions or variant.
There are three alternatives for upgrading a handset:
• Automatic upgrade, see
• License upgrade using import/export, see
page 12.
• Manual upgrade, see
Note: A handset can be re-licensed up to 99 times.
The following functions are license dependent:
• Shared Phone
• DECT Location, see
settings.
• Bluetooth Data Profile, see
settings.
• Pull cord alarm, see
1. Only applicable if the handset is used in a IP-DECT system.
29 April 2015 / Ver. I
4. Maintenance
4.4.1 Automatic License Upgrade
4.4.3 Manual License Upgrade
1
, see 5.44 Shared Phone
5.22 DECT Location and LF Location
5.46 Bluetooth Data Profile
5.28 Pull-Cord Alarm
6.1 Admin Menu Tree
on page 12.
4.4.2 License Upgrade Using Import/Export
on page 13.
on page 58 for additional settings.
on page 33 for additional
on page 60 for additional
on page 39 for additional settings
TD 92674EN
on
on
11