Handset Locks - ASCOM d81 Configuration Manual

Configuration Manual
Ascom d81 DECT Handset
Using the PDM/Device Manager and the "Edit template" feature, the parameter can be
found at
Connections > In_Charger > Clear_Lists_In_Charger
in a template or parameter definition file (.def).
The default setting for "Clear list in charger" is "Off". The feature is activated by changing
the parameter value to "On". When the feature is enabled, the lists are cleared when the
handset is placed in the charger.

5.17 Handset Locks

The PDM/Device Manager can be used to configure the following handset locks:
• Automatic keypad lock
• Phone lock.
Configuring the Keypad Lock
Handsets can be configured with a keypad lock to minimize the risk of accidentally pressing
keys or buttons while the handset is not in use. The key lock is applied after the handset has
been out of use for a specified time defined by the "Automatic lock time" parameter.
The locking and unlocking characteristics of the keypad can be defined by configuring
following parameters in the PDM/Device Manager and navigating to Settings > Locks:
• Automatic key lock. One of the following options may be configured:
"On": the keypad is automatically locked if it is not used for the specified interval.
"On, except calls": the keypad is automatically locked if it is not used for the specified
lock time. If the user is on a call when the lock time elapses, the keypad remains unlocked
until the user has completed the call.
"Off": the keypad is never automatically locked.
• Automatic lock time: specifies the time that elapses before the keypad is automatically
locked. The shortest time that may be specified before the key lock is applied is 5
seconds and the longest time is 3 minutes.
• Automatic key unlock: the keypad is automatically unlocked when a call or message is
received. When the user has serviced the call or message, the key lock is reapplied after
the specified automatic lock time expires.
Configuring the Phone Lock
The handset can be protected for unauthorized use by activating the phone lock. If this
function is activated a PIN code has to be entered at power on, or when the handset is
removed from the charger.
The locking and unlocking characteristics of the handset can be defined by configuring
following parameters in the PDM/Device Manager and navigating to Settings > Locks:
• Automatic phone lock: The parameter may be set accordingly:
"On": the handset is automatically locked if not used for the specified automatic lock
time.
"On in charger": the handset locks immediately when placed in the charger. When
removed from the charger and unlocked by the PIN, the handset remains unlocked
"Off": The handset is never locked.
• Automatic lock time: specifies the time that elapses before the handset is automatically
locked. The shortest time that may be specified before the phone lock is applied is 5
seconds and the longest time is 3 minutes.
29 April 2015 / Ver. I
5. Handset Configuration
TD 92674EN
31