Normally Displayed; Advanced Functions - ASCOM d81 Configuration Manual

Configuration Manual
Ascom d81 DECT Handset
5.9.2

Normally Displayed

These functions in this are normally displayed during calls. The administrator can add or
remove a function from the In Call menu by selecting "Edit parameters" in the PDM/Device
Manager or by opening and editing the template file from the PDM "Templates" tab:
Function
New call
End current call
Switch call
Transfer call
Conference call
Transfer to new
Callback
Call waiting
Contacts
DTMF
Decline call waiting Determines what is sent to PBX when user declines an incoming call
To locate the function and configure the associated parameter:
1 Navigate to System > System X > PBX Settings > In call functionality > <parameter
name> <value>
2 To remove the function from the In Call menu, delete the value of the parameter
associated with the function. To add a function that is not displayed, set the
parameter value associated with the function.
5.9.3

Advanced Functions

The administrator can configure the handset to allow access to the following advanced
functions during a call. These are functions intended for an advanced user such as an
installer using the handset to measure RF link and system parameters as part of a
troubleshooting or site surveying procedure.
Function
DECT Info
Location Info
These functions can be added to the handset In Call menu by activating the Admin Menu as
described in
29 April 2015 / Ver. I
5. Handset Configuration
Description
Start a new call during a conversation
End a call from the In Call menu
Switch between calls
Transfer a call
Make a conference call
Performs an unattended transfer of the inbound call to another party
May be requested if the user is engaged. When the user becomes
available, the calling party receives a callback from the PBX
May be requested if the user is already on a call. Notifies the user
that a call is waiting
Open the handset contacts list
When requested, enables the handset to send DTMF
during the current call
Description
Shows link and DECT system information
Shows location IDs and RSSI values received from location devices if
the handset has the appropriate DECT Location license and a DECT
location service is running
6.1.1 Activating the Admin Menu on page 62.
TD 92674EN
24