ASCOM d81 Configuration Manual page 62

Configuration Manual
Ascom d81 DECT Handset
• Value - Determines a value (for example, phone number) to a function. The value is only
needed for some functions.
• Control question - Determines if a Proceed? dialog shall appear when pressing a soft key.
Configure Idle display groups (sub group)
By default, the name of a system profile is displayed in the handset. It is only needed to
configure an idle display group if a system name not to be displayed in the handset.
Select System Profiles > System Profiles Sub Groups > Idle display groups > Idle display
group 1.
• Show name of system profile - Determines if the name of the system profile is displayed
in the handset's idle screen.
• Name of group - Determines the name of the group
Create System Profile using Predefined Sub Groups
To create a system profile, it must be connected to the predefined sub groups.
Select System Profiles > System Profile X.
• Soft keys group - Determines if a soft group is used.
• Alarm settings group - Determines if a alarm settings group is used.
• Presence group - Determines if a presence group is used.
• Idle display group - Determines if an idle display group is used.
Activate/Deactivate System Profile
When a system profile is created, it can be activated on the handset using PDM/Device
Manager or via an Unite application. For example, the application could be triggered by a
positioning beacon. However, this section describes how to activate the system profile using
PDM.
By default, when the system profile is activated, its name is displayed in the handset's idle
screen. The system profile name replaces the system name (that is, the DECT system the
handset is subscribed to). If a certain system profile is always activated on a handset, it is
recommended to hide the settings and menus the user cannot change. If the user changes
any settings that are specified in the system profile, the settings are not applied.
Example:
In the system profile Alarm has the alarm settings been configured. In this case, the user
cannot change any alarm settings via the handset, despite that the Alarm menu is visible. It
is recommended to hide the Alarm menu to avoid misunderstanding.
1 Select "System profiles".
2 In the Active system profile on phone drop-down list, select one of the following:
• Normal - no system profile is used.
• [System profile]
System Profile Activation and Deactivation Audible Alert
The administrator may configure the handset to play a sound if the system profile is
activated or deactivated. This provides the user with an audible alert when the system
profile changes from inactive to active or vice versa. The feature can be triggered by several
kinds of event, such as moving between different parts of a buildings where a system profile
might be appropriate in one location but not required in another.
29 April 2015 / Ver. I
5. Handset Configuration
TD 92674EN
56