Device Management In Multiple Systems - ASCOM d81 Configuration Manual

Configuration Manual
Ascom d81 DECT Handset
2.3

Device Management in Multiple Systems

When a handset is used in multiple systems, the system that the handset synchronizes with
is determined by the Device Manager in the Unite module. This means that software
upgrades and handset configurations are only applied when it is present in the system
where the handset synchronizes with the Device Manager.
The default setting depends on two conditions:
• if a handset has a valid subscription and is upgraded to software version 3.5.6 or
greater, the default setting is for the handset to synchronize with the Device Manager in
all systems.
• if a handset has no subscriptions and is subscribed to the first system, the default,
setting is for the handset to synchronize with the Device Manager in that system, that is
System A.
NOTE: When changing the "Device Management system" parameter to another system, the
handset looses the connection to the IP-DECT system for a few seconds.
1 In the PDM or Device Manager, select the "Number" tab.
2 Select the handset to be configured.
3 In the Number menu, select "Edit parameters". A dialog window opens.
4 Select "Systems".
5 In the Device Management System drop-down list, select the system to be used for
device management.
29 April 2015 / Ver. I
2. Getting Started
TD 92674EN
7