Configure Message Alerts With Beep Codes - ASCOM d81 Configuration Manual

Configuration Manual
Ascom d81 DECT Handset
Settings > Display
• Rotate display text
Determines if incoming messages are displayed upside down. This can be useful if the
user wears the handset in a belt and wants to read the message without rotating the
handset. When pressing any key, the messages are displayed in the normal way. NOTE:
This setting also affects how incoming calls are displayed.

5.31.1 Configure Message Alerts with Beep Codes

The handset can map beep codes sent from a system or an application to different message
alerts. There are several ways to threat the beep codes:
Beeps according to beep code
Beep code sent from a system/application
Beep code 0
Beep codes 1- 6
Beep code 7
1 Select Settings > Sound and Alert.
2 In the Message alert drop-down list, select "Beeps according to beep code".
High beeps according to beep code.
Beep code sent from a system/application
Beep code 0
Beep codes 1- 6
Beep code 7
The handset plays the message alerts that are mapped to beep codes but with a higher
pitch.
1 Select Settings > Sound and Alert.
2 In the Message alert drop-down list, select "High beeps according to beep code".
Enhanced beeps according to beep code.
Beep code sent from a system/application
Beep code 0
Beep codes 1 -3
Beep code 4
Beep code 5
Beep code 6
Beep code 7
The handset plays extended message alerts that are mapped to the beep codes.
1 Select Settings > Sound and Alert.
2 In the Message alert drop-down list, select "Enhanced beeps according to beep code"
29 April 2015 / Ver. I
5. Handset Configuration
The handset plays:
No message alert is played
1 - 5, and 10 beeps
Siren
The handset plays:
No message alert is played
1 - 5, and 10 beeps
Siren
The handset plays:
No message alert is played
1 - 3 beeps
3 tones chime
10 beeps
Alarm sweep
Siren
TD 92674EN
44