Sony PCS-1600 Operating Instructions Manual page 101

LAN Bandwidth: Sets the bandwidth to be used when
connected to a LAN. When [Other] is selected, bandwidth
values between 1 and 1024K can be entered.
Prefix: Selects the prefix number setting from the following.
Restrict: Selects the transfer rate via the ISDN line.
For details on setting the prefix, see page 103.
Page 2
Video Mode: Selects the protocol for the video encoding.
Video Frame: Selects the number of frames.
None: Does not use the prefix number.
Prefix-A: Uses the setting A set in the Dial Setup menu.
Prefix-B: Uses the setting B set in the Dial Setup menu.
Prefix-C: Uses the setting C set in the Dial Setup menu.
Auto: Normally, select this setting.
56K: Selects this setting when you call a region or country
via the 56 Kbps transfer rate.
Dial Setup
Page: 2/4
Video Mode:
Video Frame:
Audio Mode:
Audio Mode Threshold:
Far End Camera Control:
T.120 Data:
H.261: Sends pictures based on Recommendation H.261
(When sending pictures using Annex D).
H.263+: Sends pictures based on Recommendation H.263.
When the remote party's equipment also supports H.263+,
and the following conditions are met: H.263, 15 fps, and
less than 384 Kbps, an H.263+ (H.263 Annex-J)
connection can be established.
15fps: Sends pictures at a maximum rate of 15 frames per
second.
30fps: Sends pictures at a maximum rate of 30 frames per
second.
H.263+
15fps
Auto
up to 64K:G.728
On
Off
Save Cancel
Chapter 4 Registration and Setup
101