Sony PCS-1600 Operating Instructions Manual page 84

Registering a Remote Party
6
84
Chapter 4 Registration and Setup
When selecting LAN in step 4
Enter the IP address (or the host name and domain name)
of the remote party.
Select the line interface icons or still images stored in the
"Memory Stick."
Move the joystick to the left or right to select the icon or
still image, then press the joystick.
Note
If the "Memory Stick" which has still images is not
inserted, you cannot select still images.
To set the number of lines to be connected for an
ISDN call
If you are using an ISDN line, you can select the number
of lines to be used when you receive an ISDN call.
Select [Number of ISDN Lines to be used] with the
joystick on the Remote Commander, then press the
joystick down.
Set the number of lines by moving the joystick up or down.
1B: Connects via 1B channel.
2B: Connects via 2B channels.
3B: Connects via 3B channels.
4B: Connects via 4B channels.
5B: Connects via 5B channels.
6B: Connects via 6B channels.