Page 3
SNMP Mode: Sets up whether the SNMP agent service is
effective or not.
Trap Destination: Enter your SNMP administrator address
where you send the trap.
Community: Enter your community name that managed by
the SNMP administrator. "public" has been entered as the
default. Normally, you do not need to change this item.
Description: Enter the description of the unit.
"Videoconference Device" has been entered as the default.
You cannot change this item.
Location: Enter the location you install this unit.
Contact: Enter information on your administrator who
manages this unit.
LAN Setup
Page: 3/3
SNMP Mode:
Trap Destination:
Community:
Description:
Location:
Contact:
On: Sets the SNMP agent service effective.
Off: Sets the SNMP agent service ineffective.
On
.
.
.
Save
Cancel
Chapter 4 Registration and Setup
115