Sony PCS-1600 Operating Instructions Manual page 85

To select the LAN bandwidth to be used
When you are using a LAN, you can select the bandwidth
to be used from among the settings below.
64 Kbps, 128 Kbps, 384 Kbps, 512 Kbps, 768 Kbps, 1024
Kbps, Other
When you choose "Other," you must enter the value
yourself. Bandwidths from 1 to 1024 Kbps can be entered.
7
Select the prefix number setting.
None: Does not use the prefix number.
Prefix-A: Uses the setting A set in the Dial Setup menu.
Prefix-B: Uses the setting B set in the Dial Setup menu.
Prefix-C: Uses the setting C set in the Dial Setup menu.
For details on setting the prefix number, see "Dial Setup
Menu" on page 100.
Tip
You can verify the setup of Prefix by pressing the HELP
button on the Remote Commander.
8
Select the ISDN transfer rate.
Auto: Connects to a remote party with a normal ISDN
line.
56K: Connects to a region or country with a 56 Kbps
ISDN transfer rate.
9
Select Save with the joystick on the Remote Commander,
then press the joystick.
The registration is complete.
Notes
• When using the Compact Processor as the MCU, item
below cannot be set up:
Number of Lines, Restrict.
• When using a LAN, item below cannot be set up:
Restrict.
Chapter 4 Registration and Setup
85