Sony PCS-1600 Operating Instructions Manual page 24

Turning the System On/Off
4
5
24
Chapter 1 Preparation
Select Next with the joystick on the Remote Commander,
then press the joystick.
The next wizard appears on the monitor screen.
Area Code Local Number
A1:
A2:
Auto SPID
Previous
Set up the following items.
Area Code: Enters your area code. Do not enter the first
zero number of your area code. (e.g., enter only "408"
for California.)
Local Number: Enters your telephone number and sub-
address (if you set your sub-address). Enter the asterisk
( ) after the telephone number, then enter the sub-
address. You cannot use the alphabet in a sub-address.
When you select Auto SPID
You can automaically set up the Area Code, Local Number
on this page, and SPID items on the next page.
Notes
• "Auto SPID" is only for the USA and Canada.
• If you have installed the optional PCS-I160 BRI Board,
the boxes B1 to C2 are displayed. Register information in
the boxes B1 to C2.
Next Cancel