Selecting The Picture To Be Broadcast - Sony PCS-1600 Operating Instructions Manual

Operating Chair Controls
2

Selecting the Picture to be Broadcast

You can manually select the picture to be broadcast. Once you
select the picture, both the broadcast modes are canceled, and
the selected picture is displayed on each screen at full-size.
Select the desired terminal number from Broadcast Mode with
the joystick on the Remote Commander, then press the
joystick.
The picture from the selected terminal is broadcast.
The alphabet A, B, or C is added on the indication . This
indicates the terminal being broadcast. The indication
without the alphabet indicates that the picture of the local
terminal is being broadcast.
To go into broadcast mode
Select 4 Split or Voice Active from Broadcast Mode with the
joystick on the Remote Commander, then press the joystick.
The system returns to the 4 Split mode or the Voice Activated
mode.
140
Chapter 6 Meetings With the Multipoint Function
Select 4 Split or Voice Activated from Broadcast Mode
with the joystick on the Remote Commander, then press
the joystick.
Each time you select the setting, the mode is switched
between the 4 Split mode and the Voice Activated mode.
Display Control
Display Control
Remote
Broadcast Mode
A Broadcast