Adjusting The Camera Angle And Zoom - Sony PCS-1600 Operating Instructions Manual

Note
You cannot control the remote camera if you do not set Far
End Camera Control to On in the Dial Setup menu at the local,
and set Far End Camera Control to ON in the Answer Setup
menu at the remote.

Adjusting the Camera Angle and Zoom

You can adjust the camera angle and zoom.
To adjust the camera angle
Move the joystick on the Remote Commander up, down, to the
left, or to the right to view any areas not currently covered by
the camera. (Select Camera Angle after selecting the image
portion and pressing joystick down, when the system is not in
communication.)
To adjust zoom
Press the ZOOM/TV-CH T button on the Remote Commander
to zoom in or the ZOOM/TV-CH W button to zoom out.
Adjust zoom to display the desired picture.
Outside the
camera's scope
Chapter 2 Basic Operation During a Meeting
Within the camera's scope
57