Sony PCS-1600 Operating Instructions Manual page 150

Location and Function of Parts and Controls
9 VIDEO AUX OUT jack (phono
jack)
Connect to the video input jack of the
external equipment.
0 VIDEO MONITOR OUT1 jack
(mini DIN 4-pin)
Connect to the video input jack of the
TV monitor.
qa VIDEO MONITOR OUT2 jack
(mini DIN 4-pin)
Connect to the video input jack of the
second TV monitor when using the
dual monitor function.
qs IR OUT1/2 jacks (minijack)
Connect the supplied IR repeater to
these jacks. Connect the IR repeater to
the IR OUT1 jack for the monitor
connected to the VIDEO MONITOR
OUT1 jack and connect the IR
repeater to the IR OUT2 jack for the
monitor connected to the VIDEO
MONITOR OUT2 jack.
qd ISDN A jack (8-pin modular)
Connect the ISDN line to this jack
using the ISDN modular cable.
qf Interface board slot
Install the optional board into this slot.
qg VIDEO IN AUX 1 jack (mini
DIN 4-pin)
Connect to the video output jack of
the external equipment.
qh VIDEO IN AUX 2 jack (phono
jack)
Connect to the video output jack of
the external equipment.
150
Appendix
qj Camera screws
Loosen these screws to detach the
camera from the main unit.
Note
Tighten the camera screws firmly. If
the screws are loose, the camera may
fall down, and it causes personal
injury.