When The Compact Processor Is Turned On For The First Time - Sony PCS-1600 Operating Instructions Manual

Turning the System On/Off
After the power is turned on, the camera performs training
movements. Be careful not to catch your finger.
Sleep function
The Compact Processor is turned into sleep mode to save
power, if you do not operate the Compact Processor for about 1
to 99 minutes.
The POWER lamp on the main unit flashes while in sleep
mode.
Once a call comes in, the sleep function is automatically
released.
To release the sleep function
Press any of the buttons on the Remote Commander.
To set the time that the unit turns into sleep mode
Set the time by setting Sleep Time in the General Setup menu.
If you do not want to use the sleep function, set Sleep Mode to
Off.
For details on the Sleep Time and Sleep Mode settings, see
"General Setup Menu" on page 109.
• The POWER lamp on the camera does not flash even if the
• A Sony TV monitor is turned into standby mode.
When the Compact Processor is turned on for the first
time
The setup wizard appears on the monitor screen after the self-
diagnostic is completed.
Register your local system data following the wizard.
22
Chapter 1 Preparation
Note
Notes
system is in sleep mode.