Sony PCS-1600 Operating Instructions Manual page 45

5
Select the ISDN transfer rate.
Select Restrict with the joystick on the Remote
Commander, then press the joystick. Select the desired
setting with the joystick moving up or down, then press the
joystick.
Auto: Connects to a remote party with a normal ISDN
line.
56K: Connects to a region or country with a 56 Kbps
ISDN transfer rate.
Note
When using the Compact Processor as the Multipoint, or
holding a meeting on a LAN, the Restrict item cannot be
set.
6
Select Dial with the joystick on the Remote Commander,
then press the joystick, or press the CONNECT/
DISCONNECT ( / ) button on the Remote Commander.
The system dials the number that is input in step 2, and the
indication "Dialing (The line interface is indicated.)"
appears on the monitor screen.
When the connection is completed, the indication
"MEETING STARTS!" appears on the monitor screen.
To cancel dialing before the connection is completed
Select Cancel with the joystick on the Remote Commander,
then press the joystick, or press the CONNECT/
DISCONNECT ( / ) button on the Remote Commander.
Chapter 2 Basic Operation During a Meeting
45