When The Power Is First Turned On After Installation - Sony PCS-1 System Integration Manual

1-4-6. When the power is first turned on
after installation
When the power is first turned on after installation, the
wizard for initialization is displayed if self-diagnosis is
completed. Register according to the wizard.
The items set according to the wizard can also be later
changed on the menu screen.
n
The wizard for initialization is also displayed when ISDN
unit PCS-B384 or PCS-B768 is newly installed after
system installation. Similarly, register according to the
wizard in this case.
1. Press the ↑ and ↓ buttons of a remote controller and
select the language displayed in a menu or message.
Language:
You can select the desired language from English,
French, German, Japanese, Spanish, Italian, Simplified
Chinese, PORT (Portuguese), Traditional Chinese, and
*
Korean .
* Korean is added by upgrading.
Language Setup Wizard
Language
2. Press the ↑, ↓, ←, and → buttons of a remote
controller and click the "Next" button. Press the Enter
button.
The monitor setting wizard is displayed.
n
The monitor setting wizard is set when two or more
monitors are connected to this unit. When only one
monitor television is connected, select "Next" and
proceed to step 5.
1-14
English
Next Cancel
3. Set a monitor that outputs a signal.
n
Notice that any menu screen is not displayed on
monitors other than the set monitor when "Monitor
output" is set.
ISDN Setup Wizard
Country/Region
Country/Region Code
Protocol
Previous
Dual monitor:
Sets whether to use one monitor for a motion picture
monitor using a dual monitor function when two
monitors are connected.
ON:
Set when using a dual monitor function. A still
picture, computer picture, or whiteboard picture is
displayed in the second monitor.
OFF:
Set when not using a dual monitor function.
Monitor output (or Sub-monitor output):
Select whether to output a signal to the monitor
connected to which output terminal. The "Monitor
output" is changed to "Sub-monitor output" when
"Dual monitor" is set to "ON". In this case, select
whether to output a signal to the sub-monitor (the
second monitor) connected to which output terminal.
RGB of main unit:
Set when outputting a signal from the RGB OUT
terminal of a communication terminal.
DSB RGB:
Set when outputting a signal from the RGB OUT
terminal of a data solution box.
VIDEO of main unit:
Set when outputting a signal from the VIDEO OUT
MONITOR MAIN or SUB terminal of a
communication terminal.
USA
1
National ISDN
Next Cancel
PCS-1/1P