Starting A Point To Multi-Point Meeting; Calling Remote Parties - Sony PCS-1500 Operating Instructions Manual

Starting a Point to Multi-Point
Meeting
You can hold a point to multi-point
meeting among four terminals
(including this terminal). You can add
one normal audio phone in the
network.
Note
Before you start a meeting verify that
MCU MODE is set to ON in the MCU
SETUP menu.
For details on registration on the Dial
List menu, see "Registering a Remote
Party" on page 75.

Calling Remote Parties

To call registered remote
parties
1
Press the LIST button, the START
( ) button, or the joy stick on the
Remote Commander.
The Dial List menu appears on the
monitor screen.
Dial List
ABC -- Atlanta branch
Boston branch
Buffalo branch
Chicago branch
Cleveland branch
Dallas branch
Denver branch
SELECT:
2
Select a index title (the first
remote party) with the joy stick on
the Remote Commander.
1/7
BRI
BRI
BRI
BRI
BRI
BRI
BRI
Dial? Yes: No: CANCEL
Chapter 6 Meetings With the Upgrade Kit
3
Press the DIAL ( ) button on the
Remote Commander.
The system dials the selected
remote party in step 2, and the
indication "Dialing" appears on
the monitor screen.
When the connection is
completed, the indication
"MEETING STARTS!" appears
on the monitor screen.
4
Repeat steps 1 to 3 to connect
with the second and third parties.
Note
When connecting to the remote party
that is set to be connected via 3B-
channel or more, the system only dials
the number in the A1 box, or the ones
in the A1 and A2 boxes.
To call unregistered remote
parties
1
Press the DIAL ( ) button or one
of the number buttons (0 – 9) on
the Remote Commander.
The Manual Dial menu appears on
the monitor screen.
Manual Dial
A1
A2
B1
B2
C1
C2
NUMBER OF LINES
SELECT:
BRI
6
Dial? Yes: No: CANCEL
(Continued)
103