Starting A Point To Multi-Point Meeting; Calling Remote Parties - Sony PCS-1600 Operating Instructions Manual

Starting a Point to Multi-Point
Meeting
You can hold a point to multi-point meeting among four
terminals (including this terminal). You can add one normal
audio phone in the network.
Note
Before you start a meeting verify that MCU Mode is set to On
in the MCU Setup menu.
For details on registration on the Phone Book menu, see
"Registering a Remote Party" on page 71.

Calling Remote Parties

To call registered remote parties
1
2
3
4
Note
When connecting to the remote party that is set to be connected
via 3B-channel or more, the system only dials the number in
the A1 box, or the ones in the A1 and A2 boxes.
118
Chapter 6 Meetings With the Upgrade Kit
Press the PHONE BOOK button on the Remote
Commander.
The Phone Book menu appears on the monitor screen.
Select an index (the first remote party) with the joystick on
the Remote Commander.
Select Dial with the joystick on the Remote Commander,
then press the joystick. Or press the CONNECT/
DISCONNECT ( / ) button on the Remote Commander.
The system dials the selected remote party in step 2, and
the indication "Dialing" appears on the monitor screen.
When the connection is completed, the indication
"MEETING STARTS!" appears on the monitor screen.
Repeat steps 1 to 3 to connect with the second and third
parties.