Usb Power Select; Sata Dom Power Select - DFI DT122-BE User Manual

USB Power Select

1
1-2 On: +5V
(default)
USB 3.0 0-1
1
2
3
USB 3.0 2-3
(JP9)
1-2 On: +5V
(default)
USB 2.0 5
(JP11)
1
2
3
2-3 On:
+5V_standby
JP8, JP9, JP10 and JP11 are used to select the power of the USB ports. Selecting +5V_standby
will allow you to use a USB device to wake up the system.
Important:
If you are using the Wake-On-USB Keyboard/Mouse function for 2 USB ports, the
+5V_standby power source of your power supply must support ≥1.5A. For 3 or more
USB ports, the +5V_standby power source of your power supply must support ≥2A.
Chapter 4 Jumper Settings
1 2 3
2 3
2-3 On:
+5V_standby
USB 2.0 0-1/2-3
(JP8) (JP10)
Chapter 4

SATA DOM Power Select

JP2 is used to select the power level of SATA DOM.
Note:
SATA port 0 provides adequate space for SATA DOM.
20
SATA 0
JP2
1 2 3
1-2 On: GND (default)
1 2 3
2-3 On: +5V
www.dfi .com