Security; Save & Exit - DFI DT122-BE User Manual

Security

Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
Main Advanced
Chipset Boot Security
Password Description
If ONLY the Administrator's password is set,
then this only limits access to Setup and is
only asked for when entering Setup.
If ONLY the User's password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User will
have Administrator rights.
The password length must be
in the following range:
Minimum length 3
Maximum length 20
Administrator Password
User Password
Version 2.17.1246. Copyright (C) 2015 American Megatrends, Inc.
Administrator Password
Sets the administrator password.
User Password
Sets the user password.
Chapter 7 BIOS Setup
Chapter 7
Save & Exit
Set Administrator
Password.

Select Screen

Select Item
Enter: Select
+/ -: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save Changes and
Reset
ESC: Exit
Save & Exit
Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
Main Advanced Chipset
Save Changes and Reset
Discard Changes and Reset
Save Options
Save Changes
Discard Changes
Restore Defaults
Save as User Defaults
Restore User Defaults
Boot Override
Version 2.17.1246. Copyright (C) 2015 American Megatrends, Inc.
Save Changes and Reset
To save the changes, select this field and then press <Enter>. A dialog box will ap-
pear. Select Yes to reset the system after saving all changes made
Discard Changes and Reset
To discard the changes, select this field and then press <Enter>. A dialog box will ap-
pear. Select Yes to reset the system setup without saving any changes.
Save Changes
Save the changes done so far to any of the setup options
Discard Changes
Discard changes done so far to any of the setup options
Restore Defaults
To restore and load the optimized default values, select this field and then press <En-
ter>. A dialog box will appear. Select Yes to restore the default values of all the setup
options.
52
Boot Security Save & Exit
Reset the system after sav-
ing the changes.

Select Screen

Select Item
Enter: Select
+/ -:
Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save Changes and
Reset
ESC: Exit
.
.
.
www.dfi .com