DFI DT122-BE User Manual page 39

DFI Wakeup Configuration
This section configures the DFI Wakeup ACPI Power Managemnet Coniguration.
Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
Advanced
DFI Wakeup ACPI Power Management Confi guration
Resume by PME [Disabled]
Resume by USB [Disabled]
Version 2.17.1246. Copyright (C) 2015 American Megatrends, Inc.
Resume by PME
Enable this field to use the PME signal to wake up the system (via PCI, PCIE and
LAN).
Resume by USB
When Enabled, this system uses the USB signal to carry out a wakeup event.
Chapter 7 BIOS Setup
Chapter 7
CPU Configuration
This section is used to configure the CPU. It will also display the detected CPU information.
About Resume by PME
(PCI, PCIE, LAN).

Select Screen

Select Item
Enter: Select
+/ -: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save Changes and
Reset
ESC: Exit
39
Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
Advanced
CPU Confi guration
NX Mode [Enabled]
SVM Mode [Enabled]
 Node 0 Information

Version 2.17.1246. Copyright (C) 2015 American Megatrends, Inc.
NX Mode
Enable or disable No-execute page protection function
SVM Mode
Enable or disable the CPU vertualization.
Node 0 Information
View the memory information related to Node 0.
Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
Advanced
Socket 0: AMD RX-225FB with AMD Radeon(tm) R4 Graphics
Dual Core Running @ 2231 MHz 1050 mV
Processor Family: 15h
Processor Model: 30h~30Fh
Max Speed: 2200 MHz Intended Speed: 2200 MHz
Min Speed: 1100 MHz
Microcode Patch Level: 6003106
---------- Cache per Core -----------
L1 Instruction Cache: 48 KB/-way
L1 Data Cache: 16 KB/4-way
L2 Cache: 512 KB/16-way
No L3 Cache Present
Version 2.17.1246. Copyright (C) 2015 American Megatrends, Inc.
Enabled/Disable No-
execute page protection
Function.

Select Screen

Select Item
Enter: Select
+/ -:
Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save Changes and
Reset
ESC: Exit
.

Select Screen

Select Item
Enter: Select
+/ -:
Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save Changes and
Reset
ESC: Exit
www.dfi .com