Chapter 3 - Installing Devices; Removing The Chassis Cover - DFI DT122-BE User Manual

Chapter 3 - Installing Devices

Removing the Chassis Cover

1. Make sure the system and all other peripheral devices connected to it have been powered-off.
2. Disconnect all power cords and cables.
3. The 4 mounting screws on the sides of the system are used to secure the cover to the chassis.
Remove these screws and then put them in a safe place for later use.
Mounting
screw
4. After removing these mounting screws, slide the cover backwards.
Slide the Cover Backward
Chapter 3 Installing Devices
Chapter 3
5. The SODIMM sockets, Mini PCIe slot and SATA drive bay are readily accessible after removing
the chassis cover.
2.5"/3.5" SATA
drive bay
Mounting
screw
11
Mini PCIe slot
SODIMM sockets
www.dfi .com