Throttle Lever; Ibr Lever (Intelligent Brake And Reverse) (All Models Except Gts) - Sea-doo GTS Operator's Manual

TYPE OF KEY IS DISPLAYED HERE
Message possibilities:
– NORMAL KEY
– LEARNING KEY
– RENTAL KEY.
The SEA-DOO
rental key, limits the speed of the
watercraft and the engine torque,
therefore enabling first time users and
less experienced operators to learn
how to operate the watercraft while
gaining the necessary confidence and
control.
The learning and rental modes also
offer the possibility of setting the ma-
ximum speed of the watercraft.
OPERATING MODES
Refer to
tion for details.

4) Throttle Lever

The throttle lever on the RH handle-
bar electronically controls the engine
speed.
To increase or maintain watercraft
speed, pull on the throttle lever with
your finger.
To decrease watercraft speed, release
the throttle lever.
learning key
subsec-
_______________
smo2009-002-201_a
TYPICAL
1. Throttle lever
2. To accelerate
3. To decelerate
The throttle lever is spring loaded and
should return to rest position (idle)
when not pressed.
or
5) iBR Lever (intelligent
Brake and Reverse) (All
Models Except GTS)
The iBR lever on the LH handlebar can
electronically command:
– Reverse
– Neutral
– Braking.
NOTE: A minimum of 25% lever travel
is required to activate iBR functions.
smo2011-003-020_a
TYPICAL - iBR LEVER
1. iBR lever
2. Lever rest position
3. 25% stroke required to activate iBR function
4. Operating range
At speeds below 8 km/h (5 MPH),
pulling the iBR lever in will engage re-
verse.
CONTROLS
47