How To Engage Neutral (Ibr Equipped Models Only); How To Engage Forward (Ibr Equipped Models Only); Operating Instructions (Cont'd) - Sea-doo GTS Operator's Manual

We recommend that you familiarize
yourself with this feature during your
first ride.
How to Engage Neutral (iBR
Equipped Models Only)
WARNING
The drive shaft and impeller are
always turning when the engine is
running, even in neutral position.
Keep away from the propulsion
system of the watercraft.
When the watercraft is first started,
the iBR system automatically sets the
neutral position by default.
To engage neutral from forward posi-
tion, tap the iBR lever.
To engage neutral from reverse posi-
tion, release the iBR lever and throttle
lever.
How to Trim the Neutral Position of
the iBR
When in NEUTRAL, if the watercraft
creeps forward or backward, the iBR
system may be trimmed.
NOTE: Movement of the watercraft
when operating in neutral may be due
to wind or water current.
If the watercraft is moving forwards,
momentarily press the DOWN button.
If the watercraft is moving backwards,
momentarily press the UP button.
sdd2009-001-024_i
TRIMMING THE iBR NEUTRAL POSITION
1. UP button (to stop rearward movement)
2. DOWN button (to stop forward movement)
NOTE: Press the UP/DOWN button
repeatedly until proper adjustment of
the neutral position is attained and the
watercraft stops moving.
How to Engage Forward
(iBR Equipped Models
Only)
To engage forward from neutral po-
sition, tap on the throttle lever. The
watercraft will accelerate forward.
To engage forward from reverse posi-
tion, release the iBR lever, then tap the
throttle lever.
To re-engage forward from braking, si-
multaneously pull in the throttle lever
while releasing the iBR lever. The wa-
tercraft will accelerate forward after a
short delay.
smo2009-002-201_b
ENGAGING NEUTRAL
1. Throttle lever
_______________
OPERATING INSTRUCTIONS
79