Throttle Lever - Sea-doo RXP-X 260 Operator's Manual

CONTROLS
To have a key programmed to your
watercraft, see your authorized BRP
Sea-Doo dealer.
D.E.S.S. Key Recognition
Two short beeps indicate the system
is ready to allow engine starting. Oth-
erwise, refer to the
ING
section.
D.E.S.S. Key Types
Two types of keys can be used:
– Normal key
– Learning key
To ease key type recognition, the
tether cord float comes in different
colors.
KEY TYPE
Normal
Learning
sdd2009-001-025
TYPICAL - TETHER CORDS
1. Learning key, green float
2. Normal key, yellow or black float
The information center displays the
type of key used.
______________
42
TROUBLESHOOT-
FLOAT COLOR
Yellow or Black
Green
KEY TYPE RECOGNITION MESSAGE
NORMAL KEY or LEARNING KEY
The SEA-DOO learning key, limits the
speed of the watercraft and the en-
gine torque, therefore enabling first
time users and less experienced op-
erators to learn how to operate the
watercraft while gaining the necessary
confidence and control.
The learning mode also offers the pos-
sibility of setting the maximum speed
of the watercraft.
OPERATING MODES
Refer to
tion for details.

4) Throttle Lever

The throttle lever on the RH handle-
bar electronically controls the engine
speed.
To increase or maintain watercraft
speed, pull on the throttle lever with
your finger.
To decrease watercraft speed, release
the throttle lever.
subsec-