Throttle Lever - Sea-doo 2006 3D RFI Operator's Manual

Lift the adjuster and hold while mov-
ing handlebar to the desired position.
When handlebar is in position, release
adjuster.
There are 3 positions. Notice that in
the rearward position it is appropriate
to use your index finger to activate the
throttle. In the forward position, the
thumb is more appropriate.
Notice there are 2 start/stop buttons.
Use the button that is the most appro-
priate to you. Practice its use before
riding the watercraft.
WARNING
Prior to using the watercraft:
– Ensure handlebar is properly
adjusted and locked.
– Locate and
start/stop button.
______________________
32
practice using
1. Handlebar adjuster
2. Handlebar
3. Start/stop buttons
4. Index finger position
5. Thumb position
A. Rearward position
B. Middle position
C. Forward position

4) Throttle Lever

When the throttle lever is squeezed,
the watercraft accelerates.
fully released, engine automatically
slows down to idle speed and water-
craft is gradually stopped by water
drag.
Adjusting handlebar height changes
the throttle lever position. Refer to
HANDLEBAR ADJUSTER above.
When