Maintenance Schedule - Sea-doo GTS Operator's Manual

MAINTENANCE SCHEDULE

Maintenance is very important for keeping the watercraft in a safe operating con-
dition. The watercraft should be serviced as per the maintenance schedule.
Disregard the information pertaining to the following systems if the watercraft is
not equipped with these features:
– iBR (intelligent Brake and Reverse)
Carry out all maintenance as listed in the schedule whenever the hours or time of
each column is reached.
NOTE: As an example, at 200 hours or 2 years, complete all items in this column
and ALSO in the EVERY 100 hours or 1 year column.
Failure to properly maintain the watercraft according to the maintenance
schedule and procedures can make it unsafe to operate.
The maintenance schedule does not exempt the pre-ride inspection.
A: ADJUST
C: CLEAN
I: INSPECT
L: LUBRICATE
R: REPLACE
O: OPERATOR
D: DEALER
PART/TASK
ENGINE
Engine oil and filter
Rubber mounts
Corrosion protection
(spray an anti-corrosion lubricant
to metallic components in engine
compartment)
Supercharger clutch (215 engines)
EXHAUST SYSTEM
Exhaust system
COOLING SYSTEM
Hose and fasteners
Coolant
______________
106
WARNING
FIRST 50 HOURS OR 1 YEAR
EVERY 100 HOURS OR 1 YEAR
R R
I
L (1)
R (2)
I I, C (3)
I I
I R (4)
EVERY 200 HOURS OR 2 YEARS
TO BE PERFORMED BY
NOTE
D
D
(1) Every 10 hours
in salt water use.
(2) Replace at 200 hours,
O
irrespective of the number of
years.
D
(3) Daily flushing in salt water
O/D
or dirty water use.
D
(4) Replace at 300 hours
or 5 years
D