Analog Speedometer Description; Analog Tachometer Description - Sea-doo GTS Operator's Manual

1
FUNCTION SELECTED - CLOCK
1. CLOCK indication
2. Time
3. Press the SET button to enter the
function. CHANGE CLOCK OFF-
SET message will be displayed.
1
FUNCTION SELECTED - CHANGE
CLOCK OFFSET
1. CHANGE CLOCK OFFSET indication
2. Time
4. Press the UP/DOWN button to ad-
just the clock to the correct local
time.
5. Press the SET button to save the
setting and return to the main dis-
play.
NOTE: The clock uses the GPS sig-
nal to maintain the appropriate time
referenced to Greenwich Mean Time
(GMT). When setting the clock, only
the hour indication may be changed.
Units of Measurement and
Language Setting
The multifunction gauge is capable of
displaying information in metric or im-
perial units and in various languages.
INFORMATION CENTER (GAUGES) (GTI/GTR/WAKE)
To change the units of measurement
2
or to change the language displayed
in the multifunction gauge, see your
authorized Sea-Doo dealer.
Analog Speedometer
Description
The speedometer, located in the LH
side of the information center, pro-
vides an analog indication of the speed
of the watercraft in miles per hour
(MPH) and kilometers per hour (km/h).
The speed indication is based on a GPS
(Global Positioning System) incorpo-
rated within the information center.
If for some reason the GPS signal is
lost, a default mode is used whereby,
2 the speed is calculated using infor-
mation received from other systems
to provide an estimated watercraft
speed.
Analog Tachometer
Description
The tachometer provides an analog in-
dication of the revolutions per minute
(RPM) of the engine. Multiply the in-
dicated number by 1000 to obtain the
actual engine RPM.
_______________
65