Resetting Numerical Display Indication; Multifunction Gauge Setup - Sea-doo GTS Operator's Manual

INFORMATION CENTER (GAUGES) (GTI/GTR/WAKE)
MESSAGE DISPLAYED
DISPLAY
2. Press the SET button to enter the
DISPLAY function.
3. Press the UP/DOWN button until
the preferred indication is visible in
the multifunction display (as appli-
cable to model).
– RPM
– SPEED
– CLOCK
– ENGINE TEMP
– ALTITUDE
– TOP SPEED
– AVG SPEED
– TOP RPM
– AVG RPM.
1
NUMERICAL DISPLAY SELECTION
1. Type of selected numerical display
indication
2. Applicable value
4. Press the SET button to select and
save the preferred indication, or
wait for the display function to time
out. The last indication visible will
be automatically saved.
______________
64
Resetting Numerical
Display Indication
The following numerical display indica-
tions can be reset when selected:
– Average fuel consumption
– Top speed
– Average speed
– Top RPM
– Average RPM.
To reset the indication. double click the
SET button. The numerical display will
momentarily indicate zero (0).
NOTE: Each of these functions be-
come active ONLY when selected as
the numerical display indication.
Multifunction Gauge
Setup
Clock Setting
1. Press the MODE button repeatedly
until SETTINGS is visible in the mul-
tifunction display.
2
MESSAGE DISPLAYED
SETTINGS
2. Press the UP/DOWN button repeat-
edly until CLOCK is visible.