HUSABERG FE 450 Repair Manual page 88

– Mount the spring, washer and the O-ring on the
mixture control screw (1) and turn the mixture control
screw all the way in to the stop.
– Now unscrew the mixture control screw the number of
turns written down during disassembly.
NOTE: Basic carburetor setting: see Technical
specifications.
– Mount the idling jet (2), starting jet (3) and needle jet
together with the main jet (4).
– Insert the needle valve seat (5) in the hole and fix with
the screw (6).
– Position the float and the float needle valve and mount
the float hinge pin (7).
– Check the float level (see page G13).
– Mount the float chamber together with the gasket,
position the attachment for the adjusting screw (8) and
fix the float chamber with the screws (9).
NOTE: When mounting the float chamber, make
sure that the push rod (10) on the accelerator
pump slides into the hole.
FUEL SYSTEM
8
1
2
4
3
5
7
9
10
6
G
7
9