HUSABERG FE 450 Repair Manual page 15

DISMOUNTING AND MOUNTING THE ENGINE
– Dismount the right frame protector (1).
– Unscrew the bearing bolt (2) on the foot brake lever
and tilt the foot brake lever aside.
B
– Remove the retaining clip from the push rod holder (3),
pull out the bolt and the foot brake lever
2
– Disconnect the generator and pickup connector (4)
and remove the cable clips from the clutch line.
– Open the chain joint (5), separate the chain and
remove.
– Unscrew the clutch slave cylinder (6) and let it hang to
the side.
– Dismount the positive starter cable (7) from the starter
engine.
– Unscrew the engine ground connection (8).
– Remove both bolts (9) and pull the starter engine (10)
out of the engine case.
3
2
4
5
10
8
9
1
6
7