Fastening / Removing The Seat Cushion; Fastening / Removing The Backrest Pad - Otto Bock Ventus Instructions For Use Manual

Usage
NOTICE
Wear of the seat and backrest cover
Risk of damage to the product
► Have the seat and backrest cover replaced immediately in the event of damage or wear.
The seat cushion and the backrest upholstery ensure pressure relief during use of the wheelchair. They have been
chosen in advance by the qualified personnel according to the needs of the user.

6.3.2.1 Fastening / removing the seat cushion

If the seat upholstery is adjustable the seat cushion and seat pad can be removed for cleaning.
1) Remove the seat cushion from the seat pad (see Fig. 13).
2) Pull the seat pad upwards from the hook-and-loop fastener and remove it (see Fig. 14).
3) After cleaning:
→ Secure the seat pad to the seat upholstery by means of the hook-and-loop fastener with edges aligned (see
Fig. 14).
→ Place the seat cushion on the seat pad (see Fig. 13). The seat cushion is secured against sliding by being
pressed on to the hook-and-loop fastener.

6.3.2.2 Fastening / removing the backrest pad

The backrest pad (adjustable) can be removed for cleaning.
1) Remove the seat cushion.
2) Fold the seat pad forwards away from the hook-and-loop fastener (see Fig. 15, item 1).
3) Pull the flap of the backrest pad off the hook-and-loop fastener (see Fig. 15, item 2) and let it hang down.
4) Remove the backrest pad.
5) After cleaning:
→ Put the backrest pad back on. Place the kink in the backrest pad at the top. The "V" in the pad (see
Fig. 16, item 1) shows exactly where the kink is.
→ Pull the backrest pad flap tightly downwards (see Fig. 17).
→ Pull the part of the flap that can be fastened forwards and fasten tightly to the seat upholstery (see Fig. 15,
item 2).
INFORMATION: The part of the flap that can be fastened prevents sliding or falling through the
gaps between the straps and protects against draughts.
6) Fasten the seat pad (see Fig. 15, item 1) and the seat cushion.
16 | Ottobock
13 14
Ventus