Safety; Explanation Of Warning Symbols; General Safety Instructions; Safety Instructions For Use - Otto Bock Ventus Instructions For Use Manual

3 Safety

3.1 Explanation of Warning Symbols

Warnings regarding possible risks of severe accident or injury.
WARNING
Warnings regarding possible risks of accident or injury.
CAUTION
Warnings regarding possible technical damage.
NOTICE

3.2 General safety instructions

CAUTION
Lack of familiarisation with instructions for use
Injuries due to user error
► Read the instructions for use before using the product.
► Familiarise yourself with the handling, functions and use of the product before using it. You can compromise
the safety of the user if you do not follow these instructions.

3.3 Safety Instructions for Use

Hazards during preparation for use
WARNING
Independent modification of settings
Risk of tipping, falling or malposition
► Do not modify the settings established by the qualified personnel.
► In case of problems with the settings (unsatisfactory seating position, caster wheel wobble etc.) please con­
tact the qualified personnel who adjusted your product.
WARNING
Settings outside the safety limits
Risk of falling, tipping of the user
► In certain versions and with certain settings, the wheelchair tends to tip backwards due to its design. The fea­
ture is intentional in order to enable users with the corresponding physical preconditions to manoeuvre
quickly and nimbly.
► Users with the necessary physical/psychological preconditions can be supplied with such versions/settings. If
the physical/psychological preconditions change, the wheelchair may no longer be used with these settings.
In this case inform your dealer immediately.
WARNING
Improper handling of packaging materials
Risk of suffocation
► Keep packaging materials away from children.
CAUTION
Exposed pinch points
Risk of crushing or pinching the fingers due to incorrect handling
► When folding out the backrest, only grip by the specified components.
CAUTION
Incorrect fitting of the rear wheels
Risk of falling or tipping due to wheels coming loose
► After every assembly, check the proper mounting of the rear wheels. The wheel axles must be securely locked
in the fitting.
Ventus
Safety
Ottobock | 7