Adjusting The Leg Support; Seat And Back Upholstery; Removing And Fastening The Seat Cushion - Otto Bock Avantgarde XXL 2 Instructions For Use Manual

Use
13

7.3.4 Adjusting the leg support

Further adjustments may be made only by qualified personnel.

7.4 Seat and back upholstery

WARNING
Seat cushions and back support pads may ignite
Burns due to user error
► The seat and back support upholstery as well as seat cushions, padding and covers fulfil the normative
requirements for flame resistance. However, they may still ignite if fire is handled improperly or negligently.
► Keep away from all ignition sources, especially lit cigarettes.
CAUTION
Wear of the seat and back upholstery
Loss of functionality due to prohibited continued use
► Have the seat and back upholstery replaced immediately in case of damage.
The product is equipped with seat and back upholstery. Hook-and-loop fasteners on the seat upholstery are used
to attach the seat cushion. The seat cushion ensures pressure relief during use of the wheelchair. It was chosen by
qualified personnel according to the needs of the user.
The seat upholstery on model XXL 2 has an additional pocket with a hook-and-loop closure under the seat bottom
(see fig. 15).
15

7.4.1 Removing and fastening the seat cushion

The seat cushion can be removed for cleaning.
After cleaning, the seat cushion is placed on the seat upholstery and secured against sliding by pressing it onto the
hook-and-loop fastener on the seat upholstery.
16
14
Avantgarde XXL 2