Table of Contents
Advertisement
RAID BIOS
The RAID BIOS utility is used to configure and manage RAID on
Serial ATA drives.
When the system powers-up and all drives have been detected, the
RAID BIOS status message screen will appear. Press the <F10> key
to enter the utility. The utility allows you to build a RAID system on
Serial ATA drives.
Important:
Before creating RAID, make sure you have installed the Serial
ATA drives and connected the data cables otherwise you won't
be able to enter the RAID BIOS utility.
Refer to chapter 5 for steps in configuring RAID.
3
BIOS Setup
97
Hide quick links:
Advertisement
Table of Contents
